| Name | Description |
|---|
| Abs (4) | Absolute values. |
| Add (12) | Adds complex Value to all calling object complex elements. |
| AddProduct (2) | Add a product of two vectors. |
| AddScaled (4) | Add each of Vec elements to corresponding elements in the calling object. |
| ArcCos (4) | The inverse cosine. |
| ArcCosh (4) | Inverse hyperbolic cosine. |
| ArcCot (4) | Inverse cotangens. |
| ArcCoth (4) | Inverse hyperbolic cotangens. |
| ArcCsc (4) | Inverse cosecant. |
| ArcCsch (4) | Inverse hyperbolic cosecant. |
| ArcSec (4) | Inverse secant. |
| ArcSech (4) | Inverse hyperbolic secant. |
| ArcSin (4) | The inverse sine. |
| ArcSinh (4) | Inverse hyperbolic sine. |
| ArcTan (4) | Inverse tangens. |
| ArcTan2 (2) | Inverse tangens of Y/X. |
| ArcTanh (4) | Inverse hyperbolic tangens. |
| CartToPolar (2) | Converts elements from cartesian to polar coordinate form. |
| Cbrt (4) | The cube root. |
| CDataIndex | Returns the index offest in to the buffer. |
| Ceil (4) | Rounds towards positive infinity. |
| Conj (4) | Conjugate. |
| ConjMul (4) | Conjugate and multiply. |
| Copy (2) | Copy object values. |
| CopyCplxFromArray (4) | Copies array content. |
| CopyFromArray (6) | Copies array content. |
| CopyToArray (5) | Copies calling object data to array. |
| Cos (4) | Cosine. |
| Cosh (4) | Hyperbolic cosine. |
| Cot (4) | Cotangens. |
| Coth (4) | Hyperbolic cotangens. |
| CplxToReal (2) | Split complex calling object in real and imaginary part. |
| Csc (4) | Cosecant. |
| Csch (4) | Hyperbolic cosecant. |
| Difference (2) | The difference between two succesive vector elements. |
| DisableSelect | Prevents calls to Dew.Math.TOpenCLMtxVec.Select. |
| DisableSubrange | Prevents calls to Dew.Math.TOpenCLMtxVec.SetSubRange. |
| Divide (4) | Divide each of calling vector elements with corresponding elements in the Vec object. |
| DivideBy (8) | Divide complex Value with elements of the calling object. |
| DotProd (4) | Scalar product of two real arrays. |
| DotProdc (4) | Scalar product of two complex arrays. |
| DownSample (2) | Downsamples vector values. |
| EnableSelect | Enables calls to Dew.Math.TOpenCLMtxVec.Select. |
| EnableSubrange | Enables calls to Dew.Math.TOpenCLMtxVec.SetSubRange. |
| Erf (4) | Error functon of values. |
| Erfc (4) | Complementary error functon of values. |
| Exp (4) | Exponent (e^). |
| Exp10 (4) | Exponent base 10 (10^). |
| Exp2 (4) | Exponent base 2 (2^). |
| Expj (3) | A complex exponential e^(j*Omega)). |
| ExtendToComplex (3) | Extend Vec object to complex calling object. |
| Finish | The calling thread will block until the command queue using this object has finished. |
| FixAngle (4) | Sets angle in [-2PI,2PI]. |
| Flip (4) | Flips the real and imaginary part of complex numbers. |
| FlipConj (4) | Flips the real and imaginary part of complex numbers and conjugates the complex numbers. |
| Floor (4) | Rounds towards negative infinity. |
| Frac (4) | Fractional part of values. |
| ImagPart (2) | Gets the imaginary part of a complex object. |
| IntPower (2) | Calculate the power Base^(Exponent) for all Base object elements. |
| Inv (4) | Inverse elements. |
| InvCbrt (4) | The inverse of cube root 1/(v)^1/3. |
| InvSqrt (4) | The inverse of square root 1/(v)^1/2. |
| Ln (4) | Natural logarithm. |
| Log10 (4) | Log base 10. |
| Log2 (4) | Log base 2. |
| LogN (4) | Log base N. |
| Mag (4) | Magnitude. |
| Max (6) | Maximum value. |
| Maxc (3) | Maximum value. |
| MaxMin (4) | Maximum and minimum value in a single pass. |
| Mean (5) | Mean value. |
| Meanc (4) | Mean value. |
| Min (6) | Minimum value. |
| Minc (3) | Minimum value. |
| Mul (12) | Multiply all calling object elements with complex Value in-place. |
| MulI (4) | Multiply elements by imaginary unit I. |
| Norm | The norm of a vector. |
| Normalize (4) | Normalize Vec object by subtracting a complex constant SubOffset from Vec elements and dividing the result by real constant DivFactor. |
| NormC (4) | Calculate the C-norm of calling vector. |
| NormL1 (4) | Calculate the L1-norm of the calling vector. |
| NormL2 (4) | Calculate the L2-norm of the calling vector. |
| PhaseSpectrum (2) | The phase angles (spectrum) of object elements. |
| PolarToCart (2) | Converts the polar magnitude/phase pairs to cartesian pairs. |
| Power (7) | Raises all calling vector elements to complex power Exponent in-place. |
| PowerSpectrum (2) | The power spectrum from object complex values. |
| PowerVec | Raises Base object elements to Exponent object elements power. |
| Product (6) | Elements product. |
| Productc (2) | Elements product. |
| Ramp (7) | Fills the calling vector with a series following linear rule. |
| RealPart (2) | Gets real part of complex object values. |
| RealToCplx (2) | Constructs a complex object from two real objects. |
| Rem (4) | The Reminder after division X/Y. |
| Reverse (3) | Reverse all Vec elements. |
| RMS (2) | Standard deviation. |
| Rotate (2) | A cyclic shift on vector elements. |
| Round (4) | Elements rounded to the nearest whole number. |
| Scale (4) | Multiply all calling object elements with a complex Value in-place. |
| SDataIndex | Returns the index offest in to the buffer. |
| Sec (4) | Secant. |
| Sech (4) | Hyperbolic secant. |
| Select (2) | Resets the selection. |
| SelectAll | Resets any defined selection. |
| SetFullRange | Resets any defined subrange. |
| SetSubIndex | Defines a subarray. |
| SetSubRange (2) | Sets the subarray size to full size. |
| SetVal (4) | Set all calling object complex elements to complex Value. |
| SetZero (2) | Initializes object elements to zero. |
| Sgn (4) | Computes signum function of calling object elements. |
| SgnMul | Signum. |
| Shift (2) | Shift vector elements left or right in the array. |
| Sign (4) | Changes elements sign. |
| Sin (4) | Sine function. |
| SinCos (2) | Sine and cosine. |
| Sinh (4) | Hyperbolic sine. |
| SinhCosh (2) | Hyperbolic sine and cosine. |
| Size (2) | Sets the calling object to match the size of the Src object. |
| SizeToArray (8) | Sets the size of the array to match the size of the object. |
| Sqr (4) | Square. |
| Sqrt (4) | Square root. |
| StdDev (4) | Standard deviation. |
| Sub (12) | Subtracts complex Value from all calling object complex elements. |
| SubFrom (8) | Subtract each of calling object elements from complex Value. |
| Sum (5) | Sums vector values. |
| SumAndSqrSum (2) | Computes the sum and the sum of squared elements from the elements in the calling object. |
| Sumc (2) | Sum (complex value). |
| Tan (4) | Tangens. |
| Tanh (4) | Hyperbolic tangens. |
| ThreshBottom (4) | Perform threshold operation on all Src object values. |
| ThresholdGT (8) | Perform "greater than" threshold operation for complex numbers on all Vec object values. |
| ThresholdGT_LT (4) | Perform "greater than and less than" threshold operation on all Vec object values. |
| ThresholdLT (8) | Perform "less than" threshold operation for complex numbers on all Vec object values. |
| ThreshTop (4) | Perform threshold operation on all Src object values. |
| Trunc (4) | Rounds a real number towards zero. |
| TruncAndFrac (2) | Rounds a real number towards zero and returns the fractional part. |
| UpSample (2) | Inserts zeroes between consecutive vector values. |
| ValuesToStrings (2) | Converts the content of the calling vector to a list of strings. |
| ValuesToText (2) | Convert all vector elements to text. |